JPL
Careers
Education
Science & Technology
JPL Logo
JPL Logo
Technology
.

Metallic Glass Gears Up for ‘Cobots,’ Coatings, and More

July 29, 2021

Most metallic glass alloys form a hard, smooth surface. This gives metallic glass gears a long lifetime without the need for liquid lubricants, making them appealing for NASA robotics that operate in cold environments, where lubricants need to be warmed before operations.

Credit: NASA

NASA’s Curiosity rover spends about three hours heating up lubricants for its gears each time it sets out across Mars. To help future rovers save time and energy, NASA invested in bulk metallic glass for gears that require no lubrication.

Credit: NASA

Editor’s note: The text was updated Aug. 5, 2021, to remove the mention of the Cold Operable Lunar Deployable Arm effort.

Bulk metallic glass could slash prices of collaborative robots and lead to advanced 3D printed metals.

Where are the robot assistants we were promised?

For all the space that robots have occupied in the popular imagination for the last hundred years – and although the number of real-world automatons has been growing for decades – most people’s interactions with them remain limited to a hands-free vacuum or a child’s smart toy.

There are two main reasons for this, according to Glenn Garrett, chief technology officer of a NASA spinoff company, Amorphology Inc.: cost and safety. Most automated machinery is still only affordable to large manufacturers that can make major investments and expect long-term savings. And while robots take up more and more of the factory floor, they’re generally segregated from their human colleagues due to safety concerns – largely oblivious to their surroundings, they’re strong and dangerously clumsy.

In the mid-1990s, two Northwestern University professors patented an alternative concept under a new term: cobots. Collaborative robots, designed to cooperate with humans, would be smaller, smarter, more responsive, and more aware, with tighter self-control and better manners all around. In the years since, leaps in artificial intelligence and sensors have made these “friendlier” robots a reality but cost still prevents their widespread adoption.

“That’s where the robotics industry is going,” Garrett said, noting that a handful of cobots are already making lattes and sandwiches, for example. “But if it costs $40,000, it’s out of reach for non-industrial applications.”

The biggest cost drivers, however, aren’t always the advanced software and sensors. Instead, he said, it often comes down to some of the most rudimentary machine components: gears. “High-precision gears are at least half the cost of robotic arms.”

A strain wave gear converts the fast, low-torque rotation of an engine into slow, precise, forceful motion. As the oblong wave generator at the center spins, it deforms the flexspline around it, shown in red, which engages with the teeth of a fixed outer spline. The interaction causes the flexspline to rotate in the opposite direction of the wave generator, moving only two teeth for each turn of the motor.

Credit: Jahobr, CC0 1.0

Now, Pasadena, California-based Amorphology hopes to drop the price of cobots with advances originally made for robots that were never intended for human interaction – NASA’s planetary rovers.

Rovers Adapt to Martian Climate

Gears on NASA’s rovers, like most gears on Earth, are made of steel, which is both strong and wear resistant. But steel gears need liquid lubrication, and oils don’t work well in frigid environments like the lunar or Martian surface. So, NASA’s Curiosity rover, for example, spends about three hours warming up lubricants every time it prepares to start rolling, using up about a quarter of the discretionary energy that could otherwise be used for science, said Doug Hofmann, principal scientist of the Materials Development and Manufacturing Technology group at NASA’s Jet Propulsion Laboratory in Southern California. “So that’s really frustrating. It would be great if those gears could just turn on and drive.”

Get the Latest JPL News

SUBSCRIBE TO THE NEWSLETTER

With an eye toward solving this and other materials-related issues, in 2010, JPL hired Hofmann, then a research scientist at Caltech with a background in materials science and engineering. NASA funded a new metallurgy facility at JPL to explore alternatives for gears and develop new metal alloys.

From his days at Caltech, which manages JPL, Hofmann was familiar with an emerging class of specially engineered materials called bulk metallic glass, also known as amorphous metals. These are metal alloys that can be rapidly cooled from liquid to solid before their atoms form the crystalline lattice structure that is common to all other metals. Instead, the atoms are randomly arranged like those of glass, giving the materials properties of both glass and metal.

Depending on their constituent elements – often including zirconium, titanium, and copper – they can be very strong, and because they aren’t crystalline, they’re elastic. Most compositions also form a hard, smooth ceramic oxide surface, Hofmann explained, noting that these properties together afford gears made of some amorphous metals a long lifetime with no lubrication. “That’s, of course, really important to NASA, because you can run your gearboxes without lubricating them.”

Separately, JPL aims to use bulk metallic glass gears to operate in temperatures below minus 290 degrees Fahrenheit without needing a heating source.

Casting for Affordable Robot Parts

But amorphous metals have another property that makes them attractive for gears on Earth: “These alloys are designed to have low melting temperatures, because to make a metallic glass, you have to cool the alloy faster than it can crystallize,” Hofmann said. This low melting point, together with their native strength and the fact that their volume hardly changes upon solidifying, makes bulk metallic glasses easy to use in injection molding, which can dramatically reduce the cost of making parts like gears.

Most high-strength metals have high melting points. They can’t be cast with molds because, in molten form, they would simply melt the mold. And steel needs to be rolled or forged to strengthen it, which also precludes molding. So, gears typically start as steel billets that are “machined” – cut, ground, milled, and drilled – into their final shape. Tiny gears, like those for small cobots, are especially challenging – and costly.

The most difficult, expensive gear component to machine from a steel block is one of the most common in robotic arms: the flexspline, an extremely thin-walled, flexible cup with a toothed rim. This is the centerpiece of what’s known as a strain wave gear assembly, which offers better precision, higher torque, and lower backlash than other gear sets. This eliminates positioning errors that would be compounded in a robotic limb with multiple joints.

“It’s a very strange-looking gear if you’ve never seen it, but it’s the heart and soul of a precision robot,” said Hofmann.

This is where molding with amorphous metals promises the greatest savings: it costs about half as much as machining strain wave gears from steel, Hofmann said.

Molding small, high-performance planetary and strain wave gears became the central business plan for Amorphology, which Hofmann cofounded in 2014. Through Caltech, the company licensed several patents for technology he had developed for NASA.

Meanwhile, he and colleagues continued pursuing new materials for spacecraft at both the metallurgy lab and JPL’s Additive Manufacturing Center. A number of patents and technologies led Hofmann to found a second spinoff company focused on using amorphous metals in coatings, 3D printing, and other non-gear-related applications. Both were backed by the same venture capital group, and in 2020 they merged under the Amorphology name, combining about 30 patents and patent applications for the technology from JPL.

A Market Beyond Mars

That year, the merged company finished its move into a new, 13,000-square-foot manufacturing facility where about 15 people now work, mostly making and testing prototype pieces for small gear assemblies for several customers. Amorphology’s first and largest customer is one of the world’s foremost manufacturers of strain wave gears.

At least one other customer has hired the company to coat consumer electronics parts with metallic glass, making them more durable, indicating another market with immediate potential, said Stephen Ceplenski, chief growth officer at Amorphology.

Hofmann noted that gears that can operate without lubrication are also of interest to businesses like food manufacturing, where lubricants can become contaminants.

Meanwhile, many of the company’s other patents for JPL technology – all licensed from Caltech – are probably still years away from commercialization, although they are in fields that are gaining heavy interest. Among these are new alloys and advanced metal 3D printing technologies, from thermal spray additive manufacturing to ultrasonic welding.

Amorphology is not the first company to commercialize innovations in bulk metallic glass from JPL and Caltech, but Garrett noted that creating a startup based on new materials is notoriously difficult. If lubrication-free gears or low-cost flexsplines find a long-term market, “that would be a huge step towards sustained commercial success for bulk metallic glass,” he said. “The research for the Mars rovers would be directly responsible for that.”

NASA has a long history of transferring technology to the private sector. The agency’s Spinoff publication profiles NASA technologies that have transformed into commercial products and services, demonstrating the broader benefits of America’s investment in its space program. Spinoff is a publication of the Technology Transfer program in NASA’s Space Technology Mission Directorate.

For more information on how NASA brings space technology down to Earth, visit:

spinoff.nasa.gov

News Media Contact

Clare Skelly

NASA Headquarters, Washington

202-358-4273

clare.a.skelly@nasa.gov

Ian J. O’Neill

Jet Propulsion Laboratory, Pasadena, Calif.

818-354-2649

ian.j.oneill@jpl.nasa.gov

Written by Mike DiCicco

NASA’s Spinoff Publication

2021-158

Related News

Technology .

Moon Water Imager Integrated With NASA’s Lunar Trailblazer

Robotics .

NASA Is Testing a New Robotic Arm That Really Knows How to Chill Out

Solar System .

NASA’s Europa Clipper Gets Its Wheels for Traveling in Deep Space

Mars .

Why NASA Is Trying to Crash Land on Mars

Stars and Galaxies .

NASA Telescope Takes 12-Year Time-Lapse Movie of Entire Sky

Technology .

NASA’s Mars Mission Shields Up for Tests

Robotics .

JPL’s Venus Aerial Robotic Balloon Prototype Aces Test Flights

Technology .

JPL Developing More Tools to Help Search for Life in Deep Space

Weather .

NASA-Built Weather Sensors Capture Vital Data on Hurricane Ian

Asteroids and Comets .

NASA’s Asteroid-Striking DART Mission Team Has JPL Members

Explore More

Event Jan. 19, 2023 .

How Do Missions Get Formed?

Mission .

Lunar Flashlight

Topic .

Technology

Robotics .

Image Gallery: Robotics

Image .

Lemur-3

Image .

Nebula-Spot

Mission .

SunRISE

Mission .

Large Binocular Telescope Interferometer

Mission .

Deep Space Atomic Clock

Mission .

RainCube

About JPL
Who We Are
Executive Council
Directors
Careers
Internships
The JPL Story
JPL Achievements
Documentary Series
Annual Reports
Missions
Current
Past
Future
All
News
All
Earth
Solar System
Stars and Galaxies
Subscribe to JPL News
Galleries
Images
Videos
Audio
Podcasts
Apps
Visions of the Future
Slice of History
Robotics at JPL
Events
Lecture Series
Team Competitions
Speakers Bureau
Calendar
Visit
Public Tours
Virtual Tour
Directions and Maps
Topics
JPL Life
Solar System
Mars
Earth
Climate Change
Exoplanets
Stars and Galaxies
Robotics
More
Asteroid Watch
NASA's Eyes Visualizations
Universe - Internal Newsletter
Social Media
Get the Latest from JPL
Follow Us

JPL is a federally funded research and development center managed for NASA by Caltech.

More from JPL
Careers Education Science & Technology Acquisitions JPL Store
Careers
Education
Science & Technology
Acquisitions
JPL Store
Related NASA Sites
Basics of Spaceflight
Climate Kids
Earth / Global Climate Change
Exoplanet Exploration
Mars Exploration
Solar System Exploration
Space Place
NASA's Eyes Visualization Project
Voyager Interstellar Mission
NASA
Caltech
Privacy
Image Policy
FAQ
Feedback
Site Managers: Veronica McGregor, Randal Jackson
Site Editors: Tony Greicius, Naomi Hartono
CL#: 21-0018