Blogs by Julie Cooper

Blogs by Julie Cooper

Julie Cooper is a certified archivist who identifies and processes collections for the JPL Archives, and helps researchers find information about the history of JPL.


Granite Oil Slip Table

In 1963, spacecraft vibration tests were conducted in the Environmental Laboratory at NASA's Jet Propulsion Laboratory in Pasadena, Calif. A slab of granite, coated in oil, provided a smooth and stable base for the magnesium slip plate, test fixture and Ranger 6 spacecraft mounted on it. There were vibration exciters (shakers) on each end, capable of more than 25,000 pounds of force. The horizontal fixture at left was used for low frequency vibration testing, and the equipment was capable of testing along all three spacecraft axes.

During the 1960s, Ranger, Surveyor and Mariner spacecraft were developed, built and tested at JPL. Because of the heavy use, a similar but smaller test fixture was used for vibration tests on spacecraft components and assemblies. Building 144 still contains test facilities, but this equipment was removed and the room now contains an acoustic chamber.

This post was written for “Historical Photo of the Month,” a blog by Julie Cooper of JPL's Library and Archives Group.

TAGS: HISTORY, TECHNOLOGY, RANGER, SURVEYOR, MARINER, SPACECRAFT, MISSION

  • Julie Cooper
READ MORE

Viking Stereo Viewer

This interactive computer-based stereo viewing system was used to analyze Mars topography images generated by the cameras on NASA's Viking 1 Mars lander. Two 17-inch video monitors faced a scanning stereoscope mounted between them on a table. Left and right lander camera image data were sent to the left and right monitors. Panning controls on the stereoscope helped align one image with the other to create a stereo image, 640 by 512 pixels in size. A mouse was used for finely controlled rotation of the monitors. An article about the system described a prototype mouse, used before this photo was taken in 1976. "The track ball is a baseball-sized sphere protruding from the top of a retaining box and capable of being rotated freely and indefinitely about its center ..."

The resulting images could be displayed on additional monitors and were used to create contour maps and other images that aided lander surface operations. The system was developed by Stanford University and NASA's Jet Propulsion Laboratory in Pasadena, Calif.

This post was written for “Historical Photo of the Month,” a blog by Julie Cooper of JPL's Library and Archives Group.

TAGS: HISTORY, VIKING, TECHNOLOGY, MISSION, SPACECRAFT, MARS, SOLAR SYSTEM,

  • Julie Cooper
READ MORE

1944 Map of JPL

On October 31, NASA's Jet Propulsion Laboratory in Pasadena, Calif., celebrated its 76th anniversary. It began with a few individuals working on the Caltech campus and testing rocket motors in the Arroyo Seco. By the time this 1944 map of "The Project" was created, JPL was supported by Army Air Corps contracts and the site included more than 50 offices, labs and test facilities.

This post was written for “Historical Photo of the Month,” a blog by Julie Cooper of JPL's Library and Archives Group.

TAGS: HISTORY

  • Julie Cooper
READ MORE

magnetic bearing

In 1960 through 1961, several different experiments were conducted at NASA's Jet Propulsion Laboratory in Pasadena, Calif., in search of a frictionless bearing for use in space applications, gyroscopes and other machinery. There were cryogenic, gas and electrostatic types of bearings, and the photo above shows a magnetic bearing. It was suspended by counterbalancing the force of gravity and an electromagnet. A servo feedback system continually corrected the current flow through the electromagnet to keep it stable.

This post was written for “Historical Photo of the Month,” a blog by Julie Cooper of JPL's Library and Archives Group.

TAGS: HISTORY, TECHNOLOGY,

  • Julie Cooper
READ MORE

Free Fall Capsule Drop Test

In 1961, a drop capsule was developed at NASA's Jet Propulsion Laboratory in Pasadena, Calif., by Section 354, Engineering Research. It was an experimental chamber to study how liquids behave in free-fall (zero gravity). The prototype capsule was dropped from a helicopter hovering at 800 feet, but the capsule was found to be too unstable for these tests. In September 1962, a trial drop was done from the Bailey bridge that connected JPL to the east parking lot. Testing was then moved to a bridge crossing Glen Canyon near Page, Arizona. The dam was under construction at the time and provided a 672-foot-fall with a soft dirt impact area.

The 204 pound shell contained a high-impact sequence camera designed for this experiment, a stopwatch, a liquid sample and a release mechanism. Three external motion picture cameras with different focal lengths looked down on the capsule as it fell. Although the capsule fell for about 10 seconds without rolling, pitching or yawing, there were problems with the internal release mechanism. It appears the experiment was discontinued after two attempts.

This post was written for “Historical Photo of the Month,” a blog by Julie Cooper of JPL's Library and Archives Group.

TAGS: HISTORY, TECHNOLOGY

  • Julie Cooper
READ MORE

Remote Controlled Manipulators

The NASA Jet Propulsion Laboratory's 1971 Annual Report featured this photo of a remote controlled system for handling solid propellants. A 1965 Space Programs Summary report indicated that the equipment had been ordered and would be installed in building 197 within a few months. This equipment made it possible to safely mix and load high energy solid propellants into small motors. Building 197 is still known as the Solid Propellant Engineering Laboratory.

This post was written for “Historical Photo of the Month,” a blog by Julie Cooper of JPL's Library and Archives Group.

TAGS: HISTORY, TECHNOLOGY, ROBOTICS

  • Julie Cooper
READ MORE

A large pond and smaller building 264 at JPL

To anyone who came to NASA's Jet Propulsion Laboratory in Pasadena, Calif., after 1975, this photo may seem odd – building 264 has only two stories, and there is a large pond running down the middle of the mall.

In September 1970, construction began on building 264, the Systems Development Laboratory, a support facility for the Space Flight Operations Facility in building 230. A 7.5 foot tunnel connected the two buildings, lined with racks to support the cables and wiring that joined them. It was constructed as a two story building with a foundation capable of supporting six additional floors, although JPL had to wait several years for additional funding to be approved. The building was finally completed late in 1975, providing mission support for the Viking and Voyager missions, computer space, and three floors of office space.

The pond was nearly 300 feet long, stretching from the mall fountain to a parking area at the east end of building 183. It was built in 1967 and removed by about 1989, but the fountain remains.

This post was written for “Historical Photo of the Month,” a blog by Julie Cooper of JPL's Library and Archives Group.

TAGS: HISTORY,

  • Julie Cooper
READ MORE

Scanning Electron Microscope

In late 1967, this Stereoscan Mark VI scanning electron microscope (SEM) was delivered to NASA's Jet Propulsion Laboratory by the Cambridge Instrument Company. They were in high demand at the time, and JPL had to wait nearly a year between placing the order and delivery. It was used by the Electronic Parts Engineering Section Failure Analysis Laboratory to examine microcircuits for defects. Other possible uses were for the study of metals and other materials, and to examine spores for the Capsule Sterilization Program. It used an electron beam to scan the specimen rather than visible light, at a magnification of 20X to 50,000X. The camera on the front right side could be used to record the images.

This post was written for “Historical Photo of the Month,” a blog by Julie Cooper of JPL's Library and Archives Group.

TAGS: HISTORY, TECHNOLOGY

  • Julie Cooper
READ MORE

Vice President Lyndon Johnson Visits JPL

On October 4, 1961, Vice President Lyndon B. Johnson visited NASA's Jet Propulsion Laboratory in Pasadena, Calif. In his role as chairman of the National Aeronautics and Space Council, he toured the Lab and heard presentations about JPL’s lunar programs (Ranger and Surveyor), planetary program, the Deep Space Network and future plans. President John F. Kennedy had made his presentation to Congress several months earlier about putting a man on the moon before the decade ended. During the 1960s, JPL’s role shifted somewhat from lunar and planetary exploration to support of and preparation for manned missions to the moon and planets.

This photo shows Johnson walking out of the cafeteria (then located in Building 114) with JPL Director William Pickering while employees gathered around.

This post was written for “Historical Photo of the Month,” a blog by Julie Cooper of JPL's Library and Archives Group.

TAGS: HISTORY

  • Julie Cooper
READ MORE

Surveyor 3 Camera Returned from the Moon

In November 1969 Apollo 12 astronauts Alan Bean and Pete Conrad landed on the moon less than 600 feet from NASA's Surveyor 3 spacecraft, which had been there since April 1967. They removed the camera, some cable and tubing, and the trenching scoop from the lander and brought them back to Earth so that the effects of prolonged lunar exposure could be studied by Hughes Aircraft Company (the spacecraft prime contractor) and NASA's Jet Propulsion Laboratory. The Surveyor 3 camera was kept under quarantine and studied for several weeks at the Lunar Receiving Laboratory in Houston. Then it was shipped to the Hughes facility in Culver City, Calif. This photo was taken in January 1970, probably at the Hughes facility, where Hughes and JPL employees photographed, disassembled and studied the camera in detail.

This post was written for “Historical Photo of the Month,” a blog by Julie Cooper of JPL's Library and Archives Group.

TAGS: HISTORY, SURVEYOR, EARTH'S MOON, MISSION, SPACECRAFT, SOLAR SYSTEM

  • Julie Cooper
READ MORE