LAPACK
3.4.2
LAPACK: Linear Algebra PACKage

Functions/Subroutines  
subroutine  sgees (JOBVS, SORT, SELECT, N, A, LDA, SDIM, WR, WI, VS, LDVS, WORK, LWORK, BWORK, INFO) 
SGEES computes the eigenvalues, the Schur form, and, optionally, the matrix of Schur vectors for GE matrices  
subroutine  sgeesx (JOBVS, SORT, SELECT, SENSE, N, A, LDA, SDIM, WR, WI, VS, LDVS, RCONDE, RCONDV, WORK, LWORK, IWORK, LIWORK, BWORK, INFO) 
SGEESX computes the eigenvalues, the Schur form, and, optionally, the matrix of Schur vectors for GE matrices  
subroutine  sgeev (JOBVL, JOBVR, N, A, LDA, WR, WI, VL, LDVL, VR, LDVR, WORK, LWORK, INFO) 
SGEEV computes the eigenvalues and, optionally, the left and/or right eigenvectors for GE matrices  
subroutine  sgeevx (BALANC, JOBVL, JOBVR, SENSE, N, A, LDA, WR, WI, VL, LDVL, VR, LDVR, ILO, IHI, SCALE, ABNRM, RCONDE, RCONDV, WORK, LWORK, IWORK, INFO) 
SGEEVX computes the eigenvalues and, optionally, the left and/or right eigenvectors for GE matrices  
subroutine  sgegs (JOBVSL, JOBVSR, N, A, LDA, B, LDB, ALPHAR, ALPHAI, BETA, VSL, LDVSL, VSR, LDVSR, WORK, LWORK, INFO) 
SGEEVX computes the eigenvalues and, optionally, the left and/or right eigenvectors for GE matrices  
subroutine  sgegv (JOBVL, JOBVR, N, A, LDA, B, LDB, ALPHAR, ALPHAI, BETA, VL, LDVL, VR, LDVR, WORK, LWORK, INFO) 
SGEEVX computes the eigenvalues and, optionally, the left and/or right eigenvectors for GE matrices  
subroutine  sgges (JOBVSL, JOBVSR, SORT, SELCTG, N, A, LDA, B, LDB, SDIM, ALPHAR, ALPHAI, BETA, VSL, LDVSL, VSR, LDVSR, WORK, LWORK, BWORK, INFO) 
SGGES computes the eigenvalues, the Schur form, and, optionally, the matrix of Schur vectors for GE matrices  
subroutine  sggesx (JOBVSL, JOBVSR, SORT, SELCTG, SENSE, N, A, LDA, B, LDB, SDIM, ALPHAR, ALPHAI, BETA, VSL, LDVSL, VSR, LDVSR, RCONDE, RCONDV, WORK, LWORK, IWORK, LIWORK, BWORK, INFO) 
SGGESX computes the eigenvalues, the Schur form, and, optionally, the matrix of Schur vectors for GE matrices  
subroutine  sggev (JOBVL, JOBVR, N, A, LDA, B, LDB, ALPHAR, ALPHAI, BETA, VL, LDVL, VR, LDVR, WORK, LWORK, INFO) 
SGGEV computes the eigenvalues and, optionally, the left and/or right eigenvectors for GE matrices  
subroutine  sggevx (BALANC, JOBVL, JOBVR, SENSE, N, A, LDA, B, LDB, ALPHAR, ALPHAI, BETA, VL, LDVL, VR, LDVR, ILO, IHI, LSCALE, RSCALE, ABNRM, BBNRM, RCONDE, RCONDV, WORK, LWORK, IWORK, BWORK, INFO) 
SGGEVX computes the eigenvalues and, optionally, the left and/or right eigenvectors for GE matrices 
This is the group of real eigenvalue driver functions for GE matrices
subroutine sgees  (  character  JOBVS, 
character  SORT,  
logical, external  SELECT,  
integer  N,  
real, dimension( lda, * )  A,  
integer  LDA,  
integer  SDIM,  
real, dimension( * )  WR,  
real, dimension( * )  WI,  
real, dimension( ldvs, * )  VS,  
integer  LDVS,  
real, dimension( * )  WORK,  
integer  LWORK,  
logical, dimension( * )  BWORK,  
integer  INFO  
) 
SGEES computes the eigenvalues, the Schur form, and, optionally, the matrix of Schur vectors for GE matrices
Download SGEES + dependencies [TGZ] [ZIP] [TXT]SGEES computes for an NbyN real nonsymmetric matrix A, the eigenvalues, the real Schur form T, and, optionally, the matrix of Schur vectors Z. This gives the Schur factorization A = Z*T*(Z**T). Optionally, it also orders the eigenvalues on the diagonal of the real Schur form so that selected eigenvalues are at the top left. The leading columns of Z then form an orthonormal basis for the invariant subspace corresponding to the selected eigenvalues. A matrix is in real Schur form if it is upper quasitriangular with 1by1 and 2by2 blocks. 2by2 blocks will be standardized in the form [ a b ] [ c a ] where b*c < 0. The eigenvalues of such a block are a + sqrt(bc).
[in]  JOBVS  JOBVS is CHARACTER*1 = 'N': Schur vectors are not computed; = 'V': Schur vectors are computed. 
[in]  SORT  SORT is CHARACTER*1 Specifies whether or not to order the eigenvalues on the diagonal of the Schur form. = 'N': Eigenvalues are not ordered; = 'S': Eigenvalues are ordered (see SELECT). 
[in]  SELECT  SELECT is LOGICAL FUNCTION of two REAL arguments SELECT must be declared EXTERNAL in the calling subroutine. If SORT = 'S', SELECT is used to select eigenvalues to sort to the top left of the Schur form. If SORT = 'N', SELECT is not referenced. An eigenvalue WR(j)+sqrt(1)*WI(j) is selected if SELECT(WR(j),WI(j)) is true; i.e., if either one of a complex conjugate pair of eigenvalues is selected, then both complex eigenvalues are selected. Note that a selected complex eigenvalue may no longer satisfy SELECT(WR(j),WI(j)) = .TRUE. after ordering, since ordering may change the value of complex eigenvalues (especially if the eigenvalue is illconditioned); in this case INFO is set to N+2 (see INFO below). 
[in]  N  N is INTEGER The order of the matrix A. N >= 0. 
[in,out]  A  A is REAL array, dimension (LDA,N) On entry, the NbyN matrix A. On exit, A has been overwritten by its real Schur form T. 
[in]  LDA  LDA is INTEGER The leading dimension of the array A. LDA >= max(1,N). 
[out]  SDIM  SDIM is INTEGER If SORT = 'N', SDIM = 0. If SORT = 'S', SDIM = number of eigenvalues (after sorting) for which SELECT is true. (Complex conjugate pairs for which SELECT is true for either eigenvalue count as 2.) 
[out]  WR  WR is REAL array, dimension (N) 
[out]  WI  WI is REAL array, dimension (N) WR and WI contain the real and imaginary parts, respectively, of the computed eigenvalues in the same order that they appear on the diagonal of the output Schur form T. Complex conjugate pairs of eigenvalues will appear consecutively with the eigenvalue having the positive imaginary part first. 
[out]  VS  VS is REAL array, dimension (LDVS,N) If JOBVS = 'V', VS contains the orthogonal matrix Z of Schur vectors. If JOBVS = 'N', VS is not referenced. 
[in]  LDVS  LDVS is INTEGER The leading dimension of the array VS. LDVS >= 1; if JOBVS = 'V', LDVS >= N. 
[out]  WORK  WORK is REAL array, dimension (MAX(1,LWORK)) On exit, if INFO = 0, WORK(1) contains the optimal LWORK. 
[in]  LWORK  LWORK is INTEGER The dimension of the array WORK. LWORK >= max(1,3*N). For good performance, LWORK must generally be larger. If LWORK = 1, then a workspace query is assumed; the routine only calculates the optimal size of the WORK array, returns this value as the first entry of the WORK array, and no error message related to LWORK is issued by XERBLA. 
[out]  BWORK  BWORK is LOGICAL array, dimension (N) Not referenced if SORT = 'N'. 
[out]  INFO  INFO is INTEGER = 0: successful exit < 0: if INFO = i, the ith argument had an illegal value. > 0: if INFO = i, and i is <= N: the QR algorithm failed to compute all the eigenvalues; elements 1:ILO1 and i+1:N of WR and WI contain those eigenvalues which have converged; if JOBVS = 'V', VS contains the matrix which reduces A to its partially converged Schur form. = N+1: the eigenvalues could not be reordered because some eigenvalues were too close to separate (the problem is very illconditioned); = N+2: after reordering, roundoff changed values of some complex eigenvalues so that leading eigenvalues in the Schur form no longer satisfy SELECT=.TRUE. This could also be caused by underflow due to scaling. 
Definition at line 216 of file sgees.f.
subroutine sgeesx  (  character  JOBVS, 
character  SORT,  
logical, external  SELECT,  
character  SENSE,  
integer  N,  
real, dimension( lda, * )  A,  
integer  LDA,  
integer  SDIM,  
real, dimension( * )  WR,  
real, dimension( * )  WI,  
real, dimension( ldvs, * )  VS,  
integer  LDVS,  
real  RCONDE,  
real  RCONDV,  
real, dimension( * )  WORK,  
integer  LWORK,  
integer, dimension( * )  IWORK,  
integer  LIWORK,  
logical, dimension( * )  BWORK,  
integer  INFO  
) 
SGEESX computes the eigenvalues, the Schur form, and, optionally, the matrix of Schur vectors for GE matrices
Download SGEESX + dependencies [TGZ] [ZIP] [TXT]SGEESX computes for an NbyN real nonsymmetric matrix A, the eigenvalues, the real Schur form T, and, optionally, the matrix of Schur vectors Z. This gives the Schur factorization A = Z*T*(Z**T). Optionally, it also orders the eigenvalues on the diagonal of the real Schur form so that selected eigenvalues are at the top left; computes a reciprocal condition number for the average of the selected eigenvalues (RCONDE); and computes a reciprocal condition number for the right invariant subspace corresponding to the selected eigenvalues (RCONDV). The leading columns of Z form an orthonormal basis for this invariant subspace. For further explanation of the reciprocal condition numbers RCONDE and RCONDV, see Section 4.10 of the LAPACK Users' Guide (where these quantities are called s and sep respectively). A real matrix is in real Schur form if it is upper quasitriangular with 1by1 and 2by2 blocks. 2by2 blocks will be standardized in the form [ a b ] [ c a ] where b*c < 0. The eigenvalues of such a block are a + sqrt(bc).
[in]  JOBVS  JOBVS is CHARACTER*1 = 'N': Schur vectors are not computed; = 'V': Schur vectors are computed. 
[in]  SORT  SORT is CHARACTER*1 Specifies whether or not to order the eigenvalues on the diagonal of the Schur form. = 'N': Eigenvalues are not ordered; = 'S': Eigenvalues are ordered (see SELECT). 
[in]  SELECT  SELECT is procedure) LOGICAL FUNCTION of two REAL arguments SELECT must be declared EXTERNAL in the calling subroutine. If SORT = 'S', SELECT is used to select eigenvalues to sort to the top left of the Schur form. If SORT = 'N', SELECT is not referenced. An eigenvalue WR(j)+sqrt(1)*WI(j) is selected if SELECT(WR(j),WI(j)) is true; i.e., if either one of a complex conjugate pair of eigenvalues is selected, then both are. Note that a selected complex eigenvalue may no longer satisfy SELECT(WR(j),WI(j)) = .TRUE. after ordering, since ordering may change the value of complex eigenvalues (especially if the eigenvalue is illconditioned); in this case INFO may be set to N+3 (see INFO below). 
[in]  SENSE  SENSE is CHARACTER*1 Determines which reciprocal condition numbers are computed. = 'N': None are computed; = 'E': Computed for average of selected eigenvalues only; = 'V': Computed for selected right invariant subspace only; = 'B': Computed for both. If SENSE = 'E', 'V' or 'B', SORT must equal 'S'. 
[in]  N  N is INTEGER The order of the matrix A. N >= 0. 
[in,out]  A  A is REAL array, dimension (LDA, N) On entry, the NbyN matrix A. On exit, A is overwritten by its real Schur form T. 
[in]  LDA  LDA is INTEGER The leading dimension of the array A. LDA >= max(1,N). 
[out]  SDIM  SDIM is INTEGER If SORT = 'N', SDIM = 0. If SORT = 'S', SDIM = number of eigenvalues (after sorting) for which SELECT is true. (Complex conjugate pairs for which SELECT is true for either eigenvalue count as 2.) 
[out]  WR  WR is REAL array, dimension (N) 
[out]  WI  WI is REAL array, dimension (N) WR and WI contain the real and imaginary parts, respectively, of the computed eigenvalues, in the same order that they appear on the diagonal of the output Schur form T. Complex conjugate pairs of eigenvalues appear consecutively with the eigenvalue having the positive imaginary part first. 
[out]  VS  VS is REAL array, dimension (LDVS,N) If JOBVS = 'V', VS contains the orthogonal matrix Z of Schur vectors. If JOBVS = 'N', VS is not referenced. 
[in]  LDVS  LDVS is INTEGER The leading dimension of the array VS. LDVS >= 1, and if JOBVS = 'V', LDVS >= N. 
[out]  RCONDE  RCONDE is REAL If SENSE = 'E' or 'B', RCONDE contains the reciprocal condition number for the average of the selected eigenvalues. Not referenced if SENSE = 'N' or 'V'. 
[out]  RCONDV  RCONDV is REAL If SENSE = 'V' or 'B', RCONDV contains the reciprocal condition number for the selected right invariant subspace. Not referenced if SENSE = 'N' or 'E'. 
[out]  WORK  WORK is REAL array, dimension (MAX(1,LWORK)) On exit, if INFO = 0, WORK(1) returns the optimal LWORK. 
[in]  LWORK  LWORK is INTEGER The dimension of the array WORK. LWORK >= max(1,3*N). Also, if SENSE = 'E' or 'V' or 'B', LWORK >= N+2*SDIM*(NSDIM), where SDIM is the number of selected eigenvalues computed by this routine. Note that N+2*SDIM*(NSDIM) <= N+N*N/2. Note also that an error is only returned if LWORK < max(1,3*N), but if SENSE = 'E' or 'V' or 'B' this may not be large enough. For good performance, LWORK must generally be larger. If LWORK = 1, then a workspace query is assumed; the routine only calculates upper bounds on the optimal sizes of the arrays WORK and IWORK, returns these values as the first entries of the WORK and IWORK arrays, and no error messages related to LWORK or LIWORK are issued by XERBLA. 
[out]  IWORK  IWORK is INTEGER array, dimension (MAX(1,LIWORK)) On exit, if INFO = 0, IWORK(1) returns the optimal LIWORK. 
[in]  LIWORK  LIWORK is INTEGER The dimension of the array IWORK. LIWORK >= 1; if SENSE = 'V' or 'B', LIWORK >= SDIM*(NSDIM). Note that SDIM*(NSDIM) <= N*N/4. Note also that an error is only returned if LIWORK < 1, but if SENSE = 'V' or 'B' this may not be large enough. If LIWORK = 1, then a workspace query is assumed; the routine only calculates upper bounds on the optimal sizes of the arrays WORK and IWORK, returns these values as the first entries of the WORK and IWORK arrays, and no error messages related to LWORK or LIWORK are issued by XERBLA. 
[out]  BWORK  BWORK is LOGICAL array, dimension (N) Not referenced if SORT = 'N'. 
[out]  INFO  INFO is INTEGER = 0: successful exit < 0: if INFO = i, the ith argument had an illegal value. > 0: if INFO = i, and i is <= N: the QR algorithm failed to compute all the eigenvalues; elements 1:ILO1 and i+1:N of WR and WI contain those eigenvalues which have converged; if JOBVS = 'V', VS contains the transformation which reduces A to its partially converged Schur form. = N+1: the eigenvalues could not be reordered because some eigenvalues were too close to separate (the problem is very illconditioned); = N+2: after reordering, roundoff changed values of some complex eigenvalues so that leading eigenvalues in the Schur form no longer satisfy SELECT=.TRUE. This could also be caused by underflow due to scaling. 
Definition at line 280 of file sgeesx.f.
subroutine sgeev  (  character  JOBVL, 
character  JOBVR,  
integer  N,  
real, dimension( lda, * )  A,  
integer  LDA,  
real, dimension( * )  WR,  
real, dimension( * )  WI,  
real, dimension( ldvl, * )  VL,  
integer  LDVL,  
real, dimension( ldvr, * )  VR,  
integer  LDVR,  
real, dimension( * )  WORK,  
integer  LWORK,  
integer  INFO  
) 
SGEEV computes the eigenvalues and, optionally, the left and/or right eigenvectors for GE matrices
Download SGEEV + dependencies [TGZ] [ZIP] [TXT]SGEEV computes for an NbyN real nonsymmetric matrix A, the eigenvalues and, optionally, the left and/or right eigenvectors. The right eigenvector v(j) of A satisfies A * v(j) = lambda(j) * v(j) where lambda(j) is its eigenvalue. The left eigenvector u(j) of A satisfies u(j)**H * A = lambda(j) * u(j)**H where u(j)**H denotes the conjugatetranspose of u(j). The computed eigenvectors are normalized to have Euclidean norm equal to 1 and largest component real.
[in]  JOBVL  JOBVL is CHARACTER*1 = 'N': left eigenvectors of A are not computed; = 'V': left eigenvectors of A are computed. 
[in]  JOBVR  JOBVR is CHARACTER*1 = 'N': right eigenvectors of A are not computed; = 'V': right eigenvectors of A are computed. 
[in]  N  N is INTEGER The order of the matrix A. N >= 0. 
[in,out]  A  A is REAL array, dimension (LDA,N) On entry, the NbyN matrix A. On exit, A has been overwritten. 
[in]  LDA  LDA is INTEGER The leading dimension of the array A. LDA >= max(1,N). 
[out]  WR  WR is REAL array, dimension (N) 
[out]  WI  WI is REAL array, dimension (N) WR and WI contain the real and imaginary parts, respectively, of the computed eigenvalues. Complex conjugate pairs of eigenvalues appear consecutively with the eigenvalue having the positive imaginary part first. 
[out]  VL  VL is REAL array, dimension (LDVL,N) If JOBVL = 'V', the left eigenvectors u(j) are stored one after another in the columns of VL, in the same order as their eigenvalues. If JOBVL = 'N', VL is not referenced. If the jth eigenvalue is real, then u(j) = VL(:,j), the jth column of VL. If the jth and (j+1)st eigenvalues form a complex conjugate pair, then u(j) = VL(:,j) + i*VL(:,j+1) and u(j+1) = VL(:,j)  i*VL(:,j+1). 
[in]  LDVL  LDVL is INTEGER The leading dimension of the array VL. LDVL >= 1; if JOBVL = 'V', LDVL >= N. 
[out]  VR  VR is REAL array, dimension (LDVR,N) If JOBVR = 'V', the right eigenvectors v(j) are stored one after another in the columns of VR, in the same order as their eigenvalues. If JOBVR = 'N', VR is not referenced. If the jth eigenvalue is real, then v(j) = VR(:,j), the jth column of VR. If the jth and (j+1)st eigenvalues form a complex conjugate pair, then v(j) = VR(:,j) + i*VR(:,j+1) and v(j+1) = VR(:,j)  i*VR(:,j+1). 
[in]  LDVR  LDVR is INTEGER The leading dimension of the array VR. LDVR >= 1; if JOBVR = 'V', LDVR >= N. 
[out]  WORK  WORK is REAL array, dimension (MAX(1,LWORK)) On exit, if INFO = 0, WORK(1) returns the optimal LWORK. 
[in]  LWORK  LWORK is INTEGER The dimension of the array WORK. LWORK >= max(1,3*N), and if JOBVL = 'V' or JOBVR = 'V', LWORK >= 4*N. For good performance, LWORK must generally be larger. If LWORK = 1, then a workspace query is assumed; the routine only calculates the optimal size of the WORK array, returns this value as the first entry of the WORK array, and no error message related to LWORK is issued by XERBLA. 
[out]  INFO  INFO is INTEGER = 0: successful exit < 0: if INFO = i, the ith argument had an illegal value. > 0: if INFO = i, the QR algorithm failed to compute all the eigenvalues, and no eigenvectors have been computed; elements i+1:N of WR and WI contain eigenvalues which have converged. 
Definition at line 189 of file sgeev.f.
subroutine sgeevx  (  character  BALANC, 
character  JOBVL,  
character  JOBVR,  
character  SENSE,  
integer  N,  
real, dimension( lda, * )  A,  
integer  LDA,  
real, dimension( * )  WR,  
real, dimension( * )  WI,  
real, dimension( ldvl, * )  VL,  
integer  LDVL,  
real, dimension( ldvr, * )  VR,  
integer  LDVR,  
integer  ILO,  
integer  IHI,  
real, dimension( * )  SCALE,  
real  ABNRM,  
real, dimension( * )  RCONDE,  
real, dimension( * )  RCONDV,  
real, dimension( * )  WORK,  
integer  LWORK,  
integer, dimension( * )  IWORK,  
integer  INFO  
) 
SGEEVX computes the eigenvalues and, optionally, the left and/or right eigenvectors for GE matrices
Download SGEEVX + dependencies [TGZ] [ZIP] [TXT]SGEEVX computes for an NbyN real nonsymmetric matrix A, the eigenvalues and, optionally, the left and/or right eigenvectors. Optionally also, it computes a balancing transformation to improve the conditioning of the eigenvalues and eigenvectors (ILO, IHI, SCALE, and ABNRM), reciprocal condition numbers for the eigenvalues (RCONDE), and reciprocal condition numbers for the right eigenvectors (RCONDV). The right eigenvector v(j) of A satisfies A * v(j) = lambda(j) * v(j) where lambda(j) is its eigenvalue. The left eigenvector u(j) of A satisfies u(j)**H * A = lambda(j) * u(j)**H where u(j)**H denotes the conjugatetranspose of u(j). The computed eigenvectors are normalized to have Euclidean norm equal to 1 and largest component real. Balancing a matrix means permuting the rows and columns to make it more nearly upper triangular, and applying a diagonal similarity transformation D * A * D**(1), where D is a diagonal matrix, to make its rows and columns closer in norm and the condition numbers of its eigenvalues and eigenvectors smaller. The computed reciprocal condition numbers correspond to the balanced matrix. Permuting rows and columns will not change the condition numbers (in exact arithmetic) but diagonal scaling will. For further explanation of balancing, see section 4.10.2 of the LAPACK Users' Guide.
[in]  BALANC  BALANC is CHARACTER*1 Indicates how the input matrix should be diagonally scaled and/or permuted to improve the conditioning of its eigenvalues. = 'N': Do not diagonally scale or permute; = 'P': Perform permutations to make the matrix more nearly upper triangular. Do not diagonally scale; = 'S': Diagonally scale the matrix, i.e. replace A by D*A*D**(1), where D is a diagonal matrix chosen to make the rows and columns of A more equal in norm. Do not permute; = 'B': Both diagonally scale and permute A. Computed reciprocal condition numbers will be for the matrix after balancing and/or permuting. Permuting does not change condition numbers (in exact arithmetic), but balancing does. 
[in]  JOBVL  JOBVL is CHARACTER*1 = 'N': left eigenvectors of A are not computed; = 'V': left eigenvectors of A are computed. If SENSE = 'E' or 'B', JOBVL must = 'V'. 
[in]  JOBVR  JOBVR is CHARACTER*1 = 'N': right eigenvectors of A are not computed; = 'V': right eigenvectors of A are computed. If SENSE = 'E' or 'B', JOBVR must = 'V'. 
[in]  SENSE  SENSE is CHARACTER*1 Determines which reciprocal condition numbers are computed. = 'N': None are computed; = 'E': Computed for eigenvalues only; = 'V': Computed for right eigenvectors only; = 'B': Computed for eigenvalues and right eigenvectors. If SENSE = 'E' or 'B', both left and right eigenvectors must also be computed (JOBVL = 'V' and JOBVR = 'V'). 
[in]  N  N is INTEGER The order of the matrix A. N >= 0. 
[in,out]  A  A is REAL array, dimension (LDA,N) On entry, the NbyN matrix A. On exit, A has been overwritten. If JOBVL = 'V' or JOBVR = 'V', A contains the real Schur form of the balanced version of the input matrix A. 
[in]  LDA  LDA is INTEGER The leading dimension of the array A. LDA >= max(1,N). 
[out]  WR  WR is REAL array, dimension (N) 
[out]  WI  WI is REAL array, dimension (N) WR and WI contain the real and imaginary parts, respectively, of the computed eigenvalues. Complex conjugate pairs of eigenvalues will appear consecutively with the eigenvalue having the positive imaginary part first. 
[out]  VL  VL is REAL array, dimension (LDVL,N) If JOBVL = 'V', the left eigenvectors u(j) are stored one after another in the columns of VL, in the same order as their eigenvalues. If JOBVL = 'N', VL is not referenced. If the jth eigenvalue is real, then u(j) = VL(:,j), the jth column of VL. If the jth and (j+1)st eigenvalues form a complex conjugate pair, then u(j) = VL(:,j) + i*VL(:,j+1) and u(j+1) = VL(:,j)  i*VL(:,j+1). 
[in]  LDVL  LDVL is INTEGER The leading dimension of the array VL. LDVL >= 1; if JOBVL = 'V', LDVL >= N. 
[out]  VR  VR is REAL array, dimension (LDVR,N) If JOBVR = 'V', the right eigenvectors v(j) are stored one after another in the columns of VR, in the same order as their eigenvalues. If JOBVR = 'N', VR is not referenced. If the jth eigenvalue is real, then v(j) = VR(:,j), the jth column of VR. If the jth and (j+1)st eigenvalues form a complex conjugate pair, then v(j) = VR(:,j) + i*VR(:,j+1) and v(j+1) = VR(:,j)  i*VR(:,j+1). 
[in]  LDVR  LDVR is INTEGER The leading dimension of the array VR. LDVR >= 1, and if JOBVR = 'V', LDVR >= N. 
[out]  ILO  ILO is INTEGER 
[out]  IHI  IHI is INTEGER ILO and IHI are integer values determined when A was balanced. The balanced A(i,j) = 0 if I > J and J = 1,...,ILO1 or I = IHI+1,...,N. 
[out]  SCALE  SCALE is REAL array, dimension (N) Details of the permutations and scaling factors applied when balancing A. If P(j) is the index of the row and column interchanged with row and column j, and D(j) is the scaling factor applied to row and column j, then SCALE(J) = P(J), for J = 1,...,ILO1 = D(J), for J = ILO,...,IHI = P(J) for J = IHI+1,...,N. The order in which the interchanges are made is N to IHI+1, then 1 to ILO1. 
[out]  ABNRM  ABNRM is REAL The onenorm of the balanced matrix (the maximum of the sum of absolute values of elements of any column). 
[out]  RCONDE  RCONDE is REAL array, dimension (N) RCONDE(j) is the reciprocal condition number of the jth eigenvalue. 
[out]  RCONDV  RCONDV is REAL array, dimension (N) RCONDV(j) is the reciprocal condition number of the jth right eigenvector. 
[out]  WORK  WORK is REAL array, dimension (MAX(1,LWORK)) On exit, if INFO = 0, WORK(1) returns the optimal LWORK. 
[in]  LWORK  LWORK is INTEGER The dimension of the array WORK. If SENSE = 'N' or 'E', LWORK >= max(1,2*N), and if JOBVL = 'V' or JOBVR = 'V', LWORK >= 3*N. If SENSE = 'V' or 'B', LWORK >= N*(N+6). For good performance, LWORK must generally be larger. If LWORK = 1, then a workspace query is assumed; the routine only calculates the optimal size of the WORK array, returns this value as the first entry of the WORK array, and no error message related to LWORK is issued by XERBLA. 
[out]  IWORK  IWORK is INTEGER array, dimension (2*N2) If SENSE = 'N' or 'E', not referenced. 
[out]  INFO  INFO is INTEGER = 0: successful exit < 0: if INFO = i, the ith argument had an illegal value. > 0: if INFO = i, the QR algorithm failed to compute all the eigenvalues, and no eigenvectors or condition numbers have been computed; elements 1:ILO1 and i+1:N of WR and WI contain eigenvalues which have converged. 
Definition at line 302 of file sgeevx.f.
subroutine sgegs  (  character  JOBVSL, 
character  JOBVSR,  
integer  N,  
real, dimension( lda, * )  A,  
integer  LDA,  
real, dimension( ldb, * )  B,  
integer  LDB,  
real, dimension( * )  ALPHAR,  
real, dimension( * )  ALPHAI,  
real, dimension( * )  BETA,  
real, dimension( ldvsl, * )  VSL,  
integer  LDVSL,  
real, dimension( ldvsr, * )  VSR,  
integer  LDVSR,  
real, dimension( * )  WORK,  
integer  LWORK,  
integer  INFO  
) 
SGEEVX computes the eigenvalues and, optionally, the left and/or right eigenvectors for GE matrices
Download SGEGS + dependencies [TGZ] [ZIP] [TXT]This routine is deprecated and has been replaced by routine SGGES. SGEGS computes the eigenvalues, real Schur form, and, optionally, left and or/right Schur vectors of a real matrix pair (A,B). Given two square matrices A and B, the generalized real Schur factorization has the form A = Q*S*Z**T, B = Q*T*Z**T where Q and Z are orthogonal matrices, T is upper triangular, and S is an upper quasitriangular matrix with 1by1 and 2by2 diagonal blocks, the 2by2 blocks corresponding to complex conjugate pairs of eigenvalues of (A,B). The columns of Q are the left Schur vectors and the columns of Z are the right Schur vectors. If only the eigenvalues of (A,B) are needed, the driver routine SGEGV should be used instead. See SGEGV for a description of the eigenvalues of the generalized nonsymmetric eigenvalue problem (GNEP).
[in]  JOBVSL  JOBVSL is CHARACTER*1 = 'N': do not compute the left Schur vectors; = 'V': compute the left Schur vectors (returned in VSL). 
[in]  JOBVSR  JOBVSR is CHARACTER*1 = 'N': do not compute the right Schur vectors; = 'V': compute the right Schur vectors (returned in VSR). 
[in]  N  N is INTEGER The order of the matrices A, B, VSL, and VSR. N >= 0. 
[in,out]  A  A is REAL array, dimension (LDA, N) On entry, the matrix A. On exit, the upper quasitriangular matrix S from the generalized real Schur factorization. 
[in]  LDA  LDA is INTEGER The leading dimension of A. LDA >= max(1,N). 
[in,out]  B  B is REAL array, dimension (LDB, N) On entry, the matrix B. On exit, the upper triangular matrix T from the generalized real Schur factorization. 
[in]  LDB  LDB is INTEGER The leading dimension of B. LDB >= max(1,N). 
[out]  ALPHAR  ALPHAR is REAL array, dimension (N) The real parts of each scalar alpha defining an eigenvalue of GNEP. 
[out]  ALPHAI  ALPHAI is REAL array, dimension (N) The imaginary parts of each scalar alpha defining an eigenvalue of GNEP. If ALPHAI(j) is zero, then the jth eigenvalue is real; if positive, then the jth and (j+1)st eigenvalues are a complex conjugate pair, with ALPHAI(j+1) = ALPHAI(j). 
[out]  BETA  BETA is REAL array, dimension (N) The scalars beta that define the eigenvalues of GNEP. Together, the quantities alpha = (ALPHAR(j),ALPHAI(j)) and beta = BETA(j) represent the jth eigenvalue of the matrix pair (A,B), in one of the forms lambda = alpha/beta or mu = beta/alpha. Since either lambda or mu may overflow, they should not, in general, be computed. 
[out]  VSL  VSL is REAL array, dimension (LDVSL,N) If JOBVSL = 'V', the matrix of left Schur vectors Q. Not referenced if JOBVSL = 'N'. 
[in]  LDVSL  LDVSL is INTEGER The leading dimension of the matrix VSL. LDVSL >=1, and if JOBVSL = 'V', LDVSL >= N. 
[out]  VSR  VSR is REAL array, dimension (LDVSR,N) If JOBVSR = 'V', the matrix of right Schur vectors Z. Not referenced if JOBVSR = 'N'. 
[in]  LDVSR  LDVSR is INTEGER The leading dimension of the matrix VSR. LDVSR >= 1, and if JOBVSR = 'V', LDVSR >= N. 
[out]  WORK  WORK is REAL array, dimension (MAX(1,LWORK)) On exit, if INFO = 0, WORK(1) returns the optimal LWORK. 
[in]  LWORK  LWORK is INTEGER The dimension of the array WORK. LWORK >= max(1,4*N). For good performance, LWORK must generally be larger. To compute the optimal value of LWORK, call ILAENV to get blocksizes (for SGEQRF, SORMQR, and SORGQR.) Then compute: NB  MAX of the blocksizes for SGEQRF, SORMQR, and SORGQR The optimal LWORK is 2*N + N*(NB+1). If LWORK = 1, then a workspace query is assumed; the routine only calculates the optimal size of the WORK array, returns this value as the first entry of the WORK array, and no error message related to LWORK is issued by XERBLA. 
[out]  INFO  INFO is INTEGER = 0: successful exit < 0: if INFO = i, the ith argument had an illegal value. = 1,...,N: The QZ iteration failed. (A,B) are not in Schur form, but ALPHAR(j), ALPHAI(j), and BETA(j) should be correct for j=INFO+1,...,N. > N: errors that usually indicate LAPACK problems: =N+1: error return from SGGBAL =N+2: error return from SGEQRF =N+3: error return from SORMQR =N+4: error return from SORGQR =N+5: error return from SGGHRD =N+6: error return from SHGEQZ (other than failed iteration) =N+7: error return from SGGBAK (computing VSL) =N+8: error return from SGGBAK (computing VSR) =N+9: error return from SLASCL (various places) 
Definition at line 226 of file sgegs.f.
subroutine sgegv  (  character  JOBVL, 
character  JOBVR,  
integer  N,  
real, dimension( lda, * )  A,  
integer  LDA,  
real, dimension( ldb, * )  B,  
integer  LDB,  
real, dimension( * )  ALPHAR,  
real, dimension( * )  ALPHAI,  
real, dimension( * )  BETA,  
real, dimension( ldvl, * )  VL,  
integer  LDVL,  
real, dimension( ldvr, * )  VR,  
integer  LDVR,  
real, dimension( * )  WORK,  
integer  LWORK,  
integer  INFO  
) 
SGEEVX computes the eigenvalues and, optionally, the left and/or right eigenvectors for GE matrices
Download SGEGV + dependencies [TGZ] [ZIP] [TXT]This routine is deprecated and has been replaced by routine SGGEV. SGEGV computes the eigenvalues and, optionally, the left and/or right eigenvectors of a real matrix pair (A,B). Given two square matrices A and B, the generalized nonsymmetric eigenvalue problem (GNEP) is to find the eigenvalues lambda and corresponding (nonzero) eigenvectors x such that A*x = lambda*B*x. An alternate form is to find the eigenvalues mu and corresponding eigenvectors y such that mu*A*y = B*y. These two forms are equivalent with mu = 1/lambda and x = y if neither lambda nor mu is zero. In order to deal with the case that lambda or mu is zero or small, two values alpha and beta are returned for each eigenvalue, such that lambda = alpha/beta and mu = beta/alpha. The vectors x and y in the above equations are right eigenvectors of the matrix pair (A,B). Vectors u and v satisfying u**H*A = lambda*u**H*B or mu*v**H*A = v**H*B are left eigenvectors of (A,B). Note: this routine performs "full balancing" on A and B
[in]  JOBVL  JOBVL is CHARACTER*1 = 'N': do not compute the left generalized eigenvectors; = 'V': compute the left generalized eigenvectors (returned in VL). 
[in]  JOBVR  JOBVR is CHARACTER*1 = 'N': do not compute the right generalized eigenvectors; = 'V': compute the right generalized eigenvectors (returned in VR). 
[in]  N  N is INTEGER The order of the matrices A, B, VL, and VR. N >= 0. 
[in,out]  A  A is REAL array, dimension (LDA, N) On entry, the matrix A. If JOBVL = 'V' or JOBVR = 'V', then on exit A contains the real Schur form of A from the generalized Schur factorization of the pair (A,B) after balancing. If no eigenvectors were computed, then only the diagonal blocks from the Schur form will be correct. See SGGHRD and SHGEQZ for details. 
[in]  LDA  LDA is INTEGER The leading dimension of A. LDA >= max(1,N). 
[in,out]  B  B is REAL array, dimension (LDB, N) On entry, the matrix B. If JOBVL = 'V' or JOBVR = 'V', then on exit B contains the upper triangular matrix obtained from B in the generalized Schur factorization of the pair (A,B) after balancing. If no eigenvectors were computed, then only those elements of B corresponding to the diagonal blocks from the Schur form of A will be correct. See SGGHRD and SHGEQZ for details. 
[in]  LDB  LDB is INTEGER The leading dimension of B. LDB >= max(1,N). 
[out]  ALPHAR  ALPHAR is REAL array, dimension (N) The real parts of each scalar alpha defining an eigenvalue of GNEP. 
[out]  ALPHAI  ALPHAI is REAL array, dimension (N) The imaginary parts of each scalar alpha defining an eigenvalue of GNEP. If ALPHAI(j) is zero, then the jth eigenvalue is real; if positive, then the jth and (j+1)st eigenvalues are a complex conjugate pair, with ALPHAI(j+1) = ALPHAI(j). 
[out]  BETA  BETA is REAL array, dimension (N) The scalars beta that define the eigenvalues of GNEP. Together, the quantities alpha = (ALPHAR(j),ALPHAI(j)) and beta = BETA(j) represent the jth eigenvalue of the matrix pair (A,B), in one of the forms lambda = alpha/beta or mu = beta/alpha. Since either lambda or mu may overflow, they should not, in general, be computed. 
[out]  VL  VL is REAL array, dimension (LDVL,N) If JOBVL = 'V', the left eigenvectors u(j) are stored in the columns of VL, in the same order as their eigenvalues. If the jth eigenvalue is real, then u(j) = VL(:,j). If the jth and (j+1)st eigenvalues form a complex conjugate pair, then u(j) = VL(:,j) + i*VL(:,j+1) and u(j+1) = VL(:,j)  i*VL(:,j+1). Each eigenvector is scaled so that its largest component has abs(real part) + abs(imag. part) = 1, except for eigenvectors corresponding to an eigenvalue with alpha = beta = 0, which are set to zero. Not referenced if JOBVL = 'N'. 
[in]  LDVL  LDVL is INTEGER The leading dimension of the matrix VL. LDVL >= 1, and if JOBVL = 'V', LDVL >= N. 
[out]  VR  VR is REAL array, dimension (LDVR,N) If JOBVR = 'V', the right eigenvectors x(j) are stored in the columns of VR, in the same order as their eigenvalues. If the jth eigenvalue is real, then x(j) = VR(:,j). If the jth and (j+1)st eigenvalues form a complex conjugate pair, then x(j) = VR(:,j) + i*VR(:,j+1) and x(j+1) = VR(:,j)  i*VR(:,j+1). Each eigenvector is scaled so that its largest component has abs(real part) + abs(imag. part) = 1, except for eigenvalues corresponding to an eigenvalue with alpha = beta = 0, which are set to zero. Not referenced if JOBVR = 'N'. 
[in]  LDVR  LDVR is INTEGER The leading dimension of the matrix VR. LDVR >= 1, and if JOBVR = 'V', LDVR >= N. 
[out]  WORK  WORK is REAL array, dimension (MAX(1,LWORK)) On exit, if INFO = 0, WORK(1) returns the optimal LWORK. 
[in]  LWORK  LWORK is INTEGER The dimension of the array WORK. LWORK >= max(1,8*N). For good performance, LWORK must generally be larger. To compute the optimal value of LWORK, call ILAENV to get blocksizes (for SGEQRF, SORMQR, and SORGQR.) Then compute: NB  MAX of the blocksizes for SGEQRF, SORMQR, and SORGQR; The optimal LWORK is: 2*N + MAX( 6*N, N*(NB+1) ). If LWORK = 1, then a workspace query is assumed; the routine only calculates the optimal size of the WORK array, returns this value as the first entry of the WORK array, and no error message related to LWORK is issued by XERBLA. 
[out]  INFO  INFO is INTEGER = 0: successful exit < 0: if INFO = i, the ith argument had an illegal value. = 1,...,N: The QZ iteration failed. No eigenvectors have been calculated, but ALPHAR(j), ALPHAI(j), and BETA(j) should be correct for j=INFO+1,...,N. > N: errors that usually indicate LAPACK problems: =N+1: error return from SGGBAL =N+2: error return from SGEQRF =N+3: error return from SORMQR =N+4: error return from SORGQR =N+5: error return from SGGHRD =N+6: error return from SHGEQZ (other than failed iteration) =N+7: error return from STGEVC =N+8: error return from SGGBAK (computing VL) =N+9: error return from SGGBAK (computing VR) =N+10: error return from SLASCL (various calls) 
Balancing  This driver calls SGGBAL to both permute and scale rows and columns of A and B. The permutations PL and PR are chosen so that PL*A*PR and PL*B*R will be upper triangular except for the diagonal blocks A(i:j,i:j) and B(i:j,i:j), with i and j as close together as possible. The diagonal scaling matrices DL and DR are chosen so that the pair DL*PL*A*PR*DR, DL*PL*B*PR*DR have elements close to one (except for the elements that start out zero.) After the eigenvalues and eigenvectors of the balanced matrices have been computed, SGGBAK transforms the eigenvectors back to what they would have been (in perfect arithmetic) if they had not been balanced. Contents of A and B on Exit        If any eigenvectors are computed (either JOBVL='V' or JOBVR='V' or both), then on exit the arrays A and B will contain the real Schur form[*] of the "balanced" versions of A and B. If no eigenvectors are computed, then only the diagonal blocks will be correct. [*] See SHGEQZ, SGEGS, or read the book "Matrix Computations", by Golub & van Loan, pub. by Johns Hopkins U. Press.
Definition at line 306 of file sgegv.f.
subroutine sgges  (  character  JOBVSL, 
character  JOBVSR,  
character  SORT,  
logical, external  SELCTG,  
integer  N,  
real, dimension( lda, * )  A,  
integer  LDA,  
real, dimension( ldb, * )  B,  
integer  LDB,  
integer  SDIM,  
real, dimension( * )  ALPHAR,  
real, dimension( * )  ALPHAI,  
real, dimension( * )  BETA,  
real, dimension( ldvsl, * )  VSL,  
integer  LDVSL,  
real, dimension( ldvsr, * )  VSR,  
integer  LDVSR,  
real, dimension( * )  WORK,  
integer  LWORK,  
logical, dimension( * )  BWORK,  
integer  INFO  
) 
SGGES computes the eigenvalues, the Schur form, and, optionally, the matrix of Schur vectors for GE matrices
Download SGGES + dependencies [TGZ] [ZIP] [TXT]SGGES computes for a pair of NbyN real nonsymmetric matrices (A,B), the generalized eigenvalues, the generalized real Schur form (S,T), optionally, the left and/or right matrices of Schur vectors (VSL and VSR). This gives the generalized Schur factorization (A,B) = ( (VSL)*S*(VSR)**T, (VSL)*T*(VSR)**T ) Optionally, it also orders the eigenvalues so that a selected cluster of eigenvalues appears in the leading diagonal blocks of the upper quasitriangular matrix S and the upper triangular matrix T.The leading columns of VSL and VSR then form an orthonormal basis for the corresponding left and right eigenspaces (deflating subspaces). (If only the generalized eigenvalues are needed, use the driver SGGEV instead, which is faster.) A generalized eigenvalue for a pair of matrices (A,B) is a scalar w or a ratio alpha/beta = w, such that A  w*B is singular. It is usually represented as the pair (alpha,beta), as there is a reasonable interpretation for beta=0 or both being zero. A pair of matrices (S,T) is in generalized real Schur form if T is upper triangular with nonnegative diagonal and S is block upper triangular with 1by1 and 2by2 blocks. 1by1 blocks correspond to real generalized eigenvalues, while 2by2 blocks of S will be "standardized" by making the corresponding elements of T have the form: [ a 0 ] [ 0 b ] and the pair of corresponding 2by2 blocks in S and T will have a complex conjugate pair of generalized eigenvalues.
[in]  JOBVSL  JOBVSL is CHARACTER*1 = 'N': do not compute the left Schur vectors; = 'V': compute the left Schur vectors. 
[in]  JOBVSR  JOBVSR is CHARACTER*1 = 'N': do not compute the right Schur vectors; = 'V': compute the right Schur vectors. 
[in]  SORT  SORT is CHARACTER*1 Specifies whether or not to order the eigenvalues on the diagonal of the generalized Schur form. = 'N': Eigenvalues are not ordered; = 'S': Eigenvalues are ordered (see SELCTG); 
[in]  SELCTG  SELCTG is a LOGICAL FUNCTION of three REAL arguments SELCTG must be declared EXTERNAL in the calling subroutine. If SORT = 'N', SELCTG is not referenced. If SORT = 'S', SELCTG is used to select eigenvalues to sort to the top left of the Schur form. An eigenvalue (ALPHAR(j)+ALPHAI(j))/BETA(j) is selected if SELCTG(ALPHAR(j),ALPHAI(j),BETA(j)) is true; i.e. if either one of a complex conjugate pair of eigenvalues is selected, then both complex eigenvalues are selected. Note that in the illconditioned case, a selected complex eigenvalue may no longer satisfy SELCTG(ALPHAR(j),ALPHAI(j), BETA(j)) = .TRUE. after ordering. INFO is to be set to N+2 in this case. 
[in]  N  N is INTEGER The order of the matrices A, B, VSL, and VSR. N >= 0. 
[in,out]  A  A is REAL array, dimension (LDA, N) On entry, the first of the pair of matrices. On exit, A has been overwritten by its generalized Schur form S. 
[in]  LDA  LDA is INTEGER The leading dimension of A. LDA >= max(1,N). 
[in,out]  B  B is REAL array, dimension (LDB, N) On entry, the second of the pair of matrices. On exit, B has been overwritten by its generalized Schur form T. 
[in]  LDB  LDB is INTEGER The leading dimension of B. LDB >= max(1,N). 
[out]  SDIM  SDIM is INTEGER If SORT = 'N', SDIM = 0. If SORT = 'S', SDIM = number of eigenvalues (after sorting) for which SELCTG is true. (Complex conjugate pairs for which SELCTG is true for either eigenvalue count as 2.) 
[out]  ALPHAR  ALPHAR is REAL array, dimension (N) 
[out]  ALPHAI  ALPHAI is REAL array, dimension (N) 
[out]  BETA  BETA is REAL array, dimension (N) On exit, (ALPHAR(j) + ALPHAI(j)*i)/BETA(j), j=1,...,N, will be the generalized eigenvalues. ALPHAR(j) + ALPHAI(j)*i, and BETA(j),j=1,...,N are the diagonals of the complex Schur form (S,T) that would result if the 2by2 diagonal blocks of the real Schur form of (A,B) were further reduced to triangular form using 2by2 complex unitary transformations. If ALPHAI(j) is zero, then the jth eigenvalue is real; if positive, then the jth and (j+1)st eigenvalues are a complex conjugate pair, with ALPHAI(j+1) negative. Note: the quotients ALPHAR(j)/BETA(j) and ALPHAI(j)/BETA(j) may easily over or underflow, and BETA(j) may even be zero. Thus, the user should avoid naively computing the ratio. However, ALPHAR and ALPHAI will be always less than and usually comparable with norm(A) in magnitude, and BETA always less than and usually comparable with norm(B). 
[out]  VSL  VSL is REAL array, dimension (LDVSL,N) If JOBVSL = 'V', VSL will contain the left Schur vectors. Not referenced if JOBVSL = 'N'. 
[in]  LDVSL  LDVSL is INTEGER The leading dimension of the matrix VSL. LDVSL >=1, and if JOBVSL = 'V', LDVSL >= N. 
[out]  VSR  VSR is REAL array, dimension (LDVSR,N) If JOBVSR = 'V', VSR will contain the right Schur vectors. Not referenced if JOBVSR = 'N'. 
[in]  LDVSR  LDVSR is INTEGER The leading dimension of the matrix VSR. LDVSR >= 1, and if JOBVSR = 'V', LDVSR >= N. 
[out]  WORK  WORK is REAL array, dimension (MAX(1,LWORK)) On exit, if INFO = 0, WORK(1) returns the optimal LWORK. 
[in]  LWORK  LWORK is INTEGER The dimension of the array WORK. If N = 0, LWORK >= 1, else LWORK >= max(8*N,6*N+16). For good performance , LWORK must generally be larger. If LWORK = 1, then a workspace query is assumed; the routine only calculates the optimal size of the WORK array, returns this value as the first entry of the WORK array, and no error message related to LWORK is issued by XERBLA. 
[out]  BWORK  BWORK is LOGICAL array, dimension (N) Not referenced if SORT = 'N'. 
[out]  INFO  INFO is INTEGER = 0: successful exit < 0: if INFO = i, the ith argument had an illegal value. = 1,...,N: The QZ iteration failed. (A,B) are not in Schur form, but ALPHAR(j), ALPHAI(j), and BETA(j) should be correct for j=INFO+1,...,N. > N: =N+1: other than QZ iteration failed in SHGEQZ. =N+2: after reordering, roundoff changed values of some complex eigenvalues so that leading eigenvalues in the Generalized Schur form no longer satisfy SELCTG=.TRUE. This could also be caused due to scaling. =N+3: reordering failed in STGSEN. 
Definition at line 283 of file sgges.f.
subroutine sggesx  (  character  JOBVSL, 
character  JOBVSR,  
character  SORT,  
logical, external  SELCTG,  
character  SENSE,  
integer  N,  
real, dimension( lda, * )  A,  
integer  LDA,  
real, dimension( ldb, * )  B,  
integer  LDB,  
integer  SDIM,  
real, dimension( * )  ALPHAR,  
real, dimension( * )  ALPHAI,  
real, dimension( * )  BETA,  
real, dimension( ldvsl, * )  VSL,  
integer  LDVSL,  
real, dimension( ldvsr, * )  VSR,  
integer  LDVSR,  
real, dimension( 2 )  RCONDE,  
real, dimension( 2 )  RCONDV,  
real, dimension( * )  WORK,  
integer  LWORK,  
integer, dimension( * )  IWORK,  
integer  LIWORK,  
logical, dimension( * )  BWORK,  
integer  INFO  
) 
SGGESX computes the eigenvalues, the Schur form, and, optionally, the matrix of Schur vectors for GE matrices
Download SGGESX + dependencies [TGZ] [ZIP] [TXT]SGGESX computes for a pair of NbyN real nonsymmetric matrices (A,B), the generalized eigenvalues, the real Schur form (S,T), and, optionally, the left and/or right matrices of Schur vectors (VSL and VSR). This gives the generalized Schur factorization (A,B) = ( (VSL) S (VSR)**T, (VSL) T (VSR)**T ) Optionally, it also orders the eigenvalues so that a selected cluster of eigenvalues appears in the leading diagonal blocks of the upper quasitriangular matrix S and the upper triangular matrix T; computes a reciprocal condition number for the average of the selected eigenvalues (RCONDE); and computes a reciprocal condition number for the right and left deflating subspaces corresponding to the selected eigenvalues (RCONDV). The leading columns of VSL and VSR then form an orthonormal basis for the corresponding left and right eigenspaces (deflating subspaces). A generalized eigenvalue for a pair of matrices (A,B) is a scalar w or a ratio alpha/beta = w, such that A  w*B is singular. It is usually represented as the pair (alpha,beta), as there is a reasonable interpretation for beta=0 or for both being zero. A pair of matrices (S,T) is in generalized real Schur form if T is upper triangular with nonnegative diagonal and S is block upper triangular with 1by1 and 2by2 blocks. 1by1 blocks correspond to real generalized eigenvalues, while 2by2 blocks of S will be "standardized" by making the corresponding elements of T have the form: [ a 0 ] [ 0 b ] and the pair of corresponding 2by2 blocks in S and T will have a complex conjugate pair of generalized eigenvalues.
[in]  JOBVSL  JOBVSL is CHARACTER*1 = 'N': do not compute the left Schur vectors; = 'V': compute the left Schur vectors. 
[in]  JOBVSR  JOBVSR is CHARACTER*1 = 'N': do not compute the right Schur vectors; = 'V': compute the right Schur vectors. 
[in]  SORT  SORT is CHARACTER*1 Specifies whether or not to order the eigenvalues on the diagonal of the generalized Schur form. = 'N': Eigenvalues are not ordered; = 'S': Eigenvalues are ordered (see SELCTG). 
[in]  SELCTG  SELCTG is procedure) LOGICAL FUNCTION of three REAL arguments SELCTG must be declared EXTERNAL in the calling subroutine. If SORT = 'N', SELCTG is not referenced. If SORT = 'S', SELCTG is used to select eigenvalues to sort to the top left of the Schur form. An eigenvalue (ALPHAR(j)+ALPHAI(j))/BETA(j) is selected if SELCTG(ALPHAR(j),ALPHAI(j),BETA(j)) is true; i.e. if either one of a complex conjugate pair of eigenvalues is selected, then both complex eigenvalues are selected. Note that a selected complex eigenvalue may no longer satisfy SELCTG(ALPHAR(j),ALPHAI(j),BETA(j)) = .TRUE. after ordering, since ordering may change the value of complex eigenvalues (especially if the eigenvalue is illconditioned), in this case INFO is set to N+3. 
[in]  SENSE  SENSE is CHARACTER*1 Determines which reciprocal condition numbers are computed. = 'N' : None are computed; = 'E' : Computed for average of selected eigenvalues only; = 'V' : Computed for selected deflating subspaces only; = 'B' : Computed for both. If SENSE = 'E', 'V', or 'B', SORT must equal 'S'. 
[in]  N  N is INTEGER The order of the matrices A, B, VSL, and VSR. N >= 0. 
[in,out]  A  A is REAL array, dimension (LDA, N) On entry, the first of the pair of matrices. On exit, A has been overwritten by its generalized Schur form S. 
[in]  LDA  LDA is INTEGER The leading dimension of A. LDA >= max(1,N). 
[in,out]  B  B is REAL array, dimension (LDB, N) On entry, the second of the pair of matrices. On exit, B has been overwritten by its generalized Schur form T. 
[in]  LDB  LDB is INTEGER The leading dimension of B. LDB >= max(1,N). 
[out]  SDIM  SDIM is INTEGER If SORT = 'N', SDIM = 0. If SORT = 'S', SDIM = number of eigenvalues (after sorting) for which SELCTG is true. (Complex conjugate pairs for which SELCTG is true for either eigenvalue count as 2.) 
[out]  ALPHAR  ALPHAR is REAL array, dimension (N) 
[out]  ALPHAI  ALPHAI is REAL array, dimension (N) 
[out]  BETA  BETA is REAL array, dimension (N) On exit, (ALPHAR(j) + ALPHAI(j)*i)/BETA(j), j=1,...,N, will be the generalized eigenvalues. ALPHAR(j) + ALPHAI(j)*i and BETA(j),j=1,...,N are the diagonals of the complex Schur form (S,T) that would result if the 2by2 diagonal blocks of the real Schur form of (A,B) were further reduced to triangular form using 2by2 complex unitary transformations. If ALPHAI(j) is zero, then the jth eigenvalue is real; if positive, then the jth and (j+1)st eigenvalues are a complex conjugate pair, with ALPHAI(j+1) negative. Note: the quotients ALPHAR(j)/BETA(j) and ALPHAI(j)/BETA(j) may easily over or underflow, and BETA(j) may even be zero. Thus, the user should avoid naively computing the ratio. However, ALPHAR and ALPHAI will be always less than and usually comparable with norm(A) in magnitude, and BETA always less than and usually comparable with norm(B). 
[out]  VSL  VSL is REAL array, dimension (LDVSL,N) If JOBVSL = 'V', VSL will contain the left Schur vectors. Not referenced if JOBVSL = 'N'. 
[in]  LDVSL  LDVSL is INTEGER The leading dimension of the matrix VSL. LDVSL >=1, and if JOBVSL = 'V', LDVSL >= N. 
[out]  VSR  VSR is REAL array, dimension (LDVSR,N) If JOBVSR = 'V', VSR will contain the right Schur vectors. Not referenced if JOBVSR = 'N'. 
[in]  LDVSR  LDVSR is INTEGER The leading dimension of the matrix VSR. LDVSR >= 1, and if JOBVSR = 'V', LDVSR >= N. 
[out]  RCONDE  RCONDE is REAL array, dimension ( 2 ) If SENSE = 'E' or 'B', RCONDE(1) and RCONDE(2) contain the reciprocal condition numbers for the average of the selected eigenvalues. Not referenced if SENSE = 'N' or 'V'. 
[out]  RCONDV  RCONDV is REAL array, dimension ( 2 ) If SENSE = 'V' or 'B', RCONDV(1) and RCONDV(2) contain the reciprocal condition numbers for the selected deflating subspaces. Not referenced if SENSE = 'N' or 'E'. 
[out]  WORK  WORK is REAL array, dimension (MAX(1,LWORK)) On exit, if INFO = 0, WORK(1) returns the optimal LWORK. 
[in]  LWORK  LWORK is INTEGER The dimension of the array WORK. If N = 0, LWORK >= 1, else if SENSE = 'E', 'V', or 'B', LWORK >= max( 8*N, 6*N+16, 2*SDIM*(NSDIM) ), else LWORK >= max( 8*N, 6*N+16 ). Note that 2*SDIM*(NSDIM) <= N*N/2. Note also that an error is only returned if LWORK < max( 8*N, 6*N+16), but if SENSE = 'E' or 'V' or 'B' this may not be large enough. If LWORK = 1, then a workspace query is assumed; the routine only calculates the bound on the optimal size of the WORK array and the minimum size of the IWORK array, returns these values as the first entries of the WORK and IWORK arrays, and no error message related to LWORK or LIWORK is issued by XERBLA. 
[out]  IWORK  IWORK is INTEGER array, dimension (MAX(1,LIWORK)) On exit, if INFO = 0, IWORK(1) returns the minimum LIWORK. 
[in]  LIWORK  LIWORK is INTEGER The dimension of the array IWORK. If SENSE = 'N' or N = 0, LIWORK >= 1, otherwise LIWORK >= N+6. If LIWORK = 1, then a workspace query is assumed; the routine only calculates the bound on the optimal size of the WORK array and the minimum size of the IWORK array, returns these values as the first entries of the WORK and IWORK arrays, and no error message related to LWORK or LIWORK is issued by XERBLA. 
[out]  BWORK  BWORK is LOGICAL array, dimension (N) Not referenced if SORT = 'N'. 
[out]  INFO  INFO is INTEGER = 0: successful exit < 0: if INFO = i, the ith argument had an illegal value. = 1,...,N: The QZ iteration failed. (A,B) are not in Schur form, but ALPHAR(j), ALPHAI(j), and BETA(j) should be correct for j=INFO+1,...,N. > N: =N+1: other than QZ iteration failed in SHGEQZ =N+2: after reordering, roundoff changed values of some complex eigenvalues so that leading eigenvalues in the Generalized Schur form no longer satisfy SELCTG=.TRUE. This could also be caused due to scaling. =N+3: reordering failed in STGSEN. 
An approximate (asymptotic) bound on the average absolute error of the selected eigenvalues is EPS * norm((A, B)) / RCONDE( 1 ). An approximate (asymptotic) bound on the maximum angular error in the computed deflating subspaces is EPS * norm((A, B)) / RCONDV( 2 ). See LAPACK User's Guide, section 4.11 for more information.
Definition at line 363 of file sggesx.f.
subroutine sggev  (  character  JOBVL, 
character  JOBVR,  
integer  N,  
real, dimension( lda, * )  A,  
integer  LDA,  
real, dimension( ldb, * )  B,  
integer  LDB,  
real, dimension( * )  ALPHAR,  
real, dimension( * )  ALPHAI,  
real, dimension( * )  BETA,  
real, dimension( ldvl, * )  VL,  
integer  LDVL,  
real, dimension( ldvr, * )  VR,  
integer  LDVR,  
real, dimension( * )  WORK,  
integer  LWORK,  
integer  INFO  
) 
SGGEV computes the eigenvalues and, optionally, the left and/or right eigenvectors for GE matrices
Download SGGEV + dependencies [TGZ] [ZIP] [TXT]SGGEV computes for a pair of NbyN real nonsymmetric matrices (A,B) the generalized eigenvalues, and optionally, the left and/or right generalized eigenvectors. A generalized eigenvalue for a pair of matrices (A,B) is a scalar lambda or a ratio alpha/beta = lambda, such that A  lambda*B is singular. It is usually represented as the pair (alpha,beta), as there is a reasonable interpretation for beta=0, and even for both being zero. The right eigenvector v(j) corresponding to the eigenvalue lambda(j) of (A,B) satisfies A * v(j) = lambda(j) * B * v(j). The left eigenvector u(j) corresponding to the eigenvalue lambda(j) of (A,B) satisfies u(j)**H * A = lambda(j) * u(j)**H * B . where u(j)**H is the conjugatetranspose of u(j).
[in]  JOBVL  JOBVL is CHARACTER*1 = 'N': do not compute the left generalized eigenvectors; = 'V': compute the left generalized eigenvectors. 
[in]  JOBVR  JOBVR is CHARACTER*1 = 'N': do not compute the right generalized eigenvectors; = 'V': compute the right generalized eigenvectors. 
[in]  N  N is INTEGER The order of the matrices A, B, VL, and VR. N >= 0. 
[in,out]  A  A is REAL array, dimension (LDA, N) On entry, the matrix A in the pair (A,B). On exit, A has been overwritten. 
[in]  LDA  LDA is INTEGER The leading dimension of A. LDA >= max(1,N). 
[in,out]  B  B is REAL array, dimension (LDB, N) On entry, the matrix B in the pair (A,B). On exit, B has been overwritten. 
[in]  LDB  LDB is INTEGER The leading dimension of B. LDB >= max(1,N). 
[out]  ALPHAR  ALPHAR is REAL array, dimension (N) 
[out]  ALPHAI  ALPHAI is REAL array, dimension (N) 
[out]  BETA  BETA is REAL array, dimension (N) On exit, (ALPHAR(j) + ALPHAI(j)*i)/BETA(j), j=1,...,N, will be the generalized eigenvalues. If ALPHAI(j) is zero, then the jth eigenvalue is real; if positive, then the jth and (j+1)st eigenvalues are a complex conjugate pair, with ALPHAI(j+1) negative. Note: the quotients ALPHAR(j)/BETA(j) and ALPHAI(j)/BETA(j) may easily over or underflow, and BETA(j) may even be zero. Thus, the user should avoid naively computing the ratio alpha/beta. However, ALPHAR and ALPHAI will be always less than and usually comparable with norm(A) in magnitude, and BETA always less than and usually comparable with norm(B). 
[out]  VL  VL is REAL array, dimension (LDVL,N) If JOBVL = 'V', the left eigenvectors u(j) are stored one after another in the columns of VL, in the same order as their eigenvalues. If the jth eigenvalue is real, then u(j) = VL(:,j), the jth column of VL. If the jth and (j+1)th eigenvalues form a complex conjugate pair, then u(j) = VL(:,j)+i*VL(:,j+1) and u(j+1) = VL(:,j)i*VL(:,j+1). Each eigenvector is scaled so the largest component has abs(real part)+abs(imag. part)=1. Not referenced if JOBVL = 'N'. 
[in]  LDVL  LDVL is INTEGER The leading dimension of the matrix VL. LDVL >= 1, and if JOBVL = 'V', LDVL >= N. 
[out]  VR  VR is REAL array, dimension (LDVR,N) If JOBVR = 'V', the right eigenvectors v(j) are stored one after another in the columns of VR, in the same order as their eigenvalues. If the jth eigenvalue is real, then v(j) = VR(:,j), the jth column of VR. If the jth and (j+1)th eigenvalues form a complex conjugate pair, then v(j) = VR(:,j)+i*VR(:,j+1) and v(j+1) = VR(:,j)i*VR(:,j+1). Each eigenvector is scaled so the largest component has abs(real part)+abs(imag. part)=1. Not referenced if JOBVR = 'N'. 
[in]  LDVR  LDVR is INTEGER The leading dimension of the matrix VR. LDVR >= 1, and if JOBVR = 'V', LDVR >= N. 
[out]  WORK  WORK is REAL array, dimension (MAX(1,LWORK)) On exit, if INFO = 0, WORK(1) returns the optimal LWORK. 
[in]  LWORK  LWORK is INTEGER The dimension of the array WORK. LWORK >= max(1,8*N). For good performance, LWORK must generally be larger. If LWORK = 1, then a workspace query is assumed; the routine only calculates the optimal size of the WORK array, returns this value as the first entry of the WORK array, and no error message related to LWORK is issued by XERBLA. 
[out]  INFO  INFO is INTEGER = 0: successful exit < 0: if INFO = i, the ith argument had an illegal value. = 1,...,N: The QZ iteration failed. No eigenvectors have been calculated, but ALPHAR(j), ALPHAI(j), and BETA(j) should be correct for j=INFO+1,...,N. > N: =N+1: other than QZ iteration failed in SHGEQZ. =N+2: error return from STGEVC. 
Definition at line 226 of file sggev.f.
subroutine sggevx  (  character  BALANC, 
character  JOBVL,  
character  JOBVR,  
character  SENSE,  
integer  N,  
real, dimension( lda, * )  A,  
integer  LDA,  
real, dimension( ldb, * )  B,  
integer  LDB,  
real, dimension( * )  ALPHAR,  
real, dimension( * )  ALPHAI,  
real, dimension( * )  BETA,  
real, dimension( ldvl, * )  VL,  
integer  LDVL,  
real, dimension( ldvr, * )  VR,  
integer  LDVR,  
integer  ILO,  
integer  IHI,  
real, dimension( * )  LSCALE,  
real, dimension( * )  RSCALE,  
real  ABNRM,  
real  BBNRM,  
real, dimension( * )  RCONDE,  
real, dimension( * )  RCONDV,  
real, dimension( * )  WORK,  
integer  LWORK,  
integer, dimension( * )  IWORK,  
logical, dimension( * )  BWORK,  
integer  INFO  
) 
SGGEVX computes the eigenvalues and, optionally, the left and/or right eigenvectors for GE matrices
Download SGGEVX + dependencies [TGZ] [ZIP] [TXT]SGGEVX computes for a pair of NbyN real nonsymmetric matrices (A,B) the generalized eigenvalues, and optionally, the left and/or right generalized eigenvectors. Optionally also, it computes a balancing transformation to improve the conditioning of the eigenvalues and eigenvectors (ILO, IHI, LSCALE, RSCALE, ABNRM, and BBNRM), reciprocal condition numbers for the eigenvalues (RCONDE), and reciprocal condition numbers for the right eigenvectors (RCONDV). A generalized eigenvalue for a pair of matrices (A,B) is a scalar lambda or a ratio alpha/beta = lambda, such that A  lambda*B is singular. It is usually represented as the pair (alpha,beta), as there is a reasonable interpretation for beta=0, and even for both being zero. The right eigenvector v(j) corresponding to the eigenvalue lambda(j) of (A,B) satisfies A * v(j) = lambda(j) * B * v(j) . The left eigenvector u(j) corresponding to the eigenvalue lambda(j) of (A,B) satisfies u(j)**H * A = lambda(j) * u(j)**H * B. where u(j)**H is the conjugatetranspose of u(j).
[in]  BALANC  BALANC is CHARACTER*1 Specifies the balance option to be performed. = 'N': do not diagonally scale or permute; = 'P': permute only; = 'S': scale only; = 'B': both permute and scale. Computed reciprocal condition numbers will be for the matrices after permuting and/or balancing. Permuting does not change condition numbers (in exact arithmetic), but balancing does. 
[in]  JOBVL  JOBVL is CHARACTER*1 = 'N': do not compute the left generalized eigenvectors; = 'V': compute the left generalized eigenvectors. 
[in]  JOBVR  JOBVR is CHARACTER*1 = 'N': do not compute the right generalized eigenvectors; = 'V': compute the right generalized eigenvectors. 
[in]  SENSE  SENSE is CHARACTER*1 Determines which reciprocal condition numbers are computed. = 'N': none are computed; = 'E': computed for eigenvalues only; = 'V': computed for eigenvectors only; = 'B': computed for eigenvalues and eigenvectors. 
[in]  N  N is INTEGER The order of the matrices A, B, VL, and VR. N >= 0. 
[in,out]  A  A is REAL array, dimension (LDA, N) On entry, the matrix A in the pair (A,B). On exit, A has been overwritten. If JOBVL='V' or JOBVR='V' or both, then A contains the first part of the real Schur form of the "balanced" versions of the input A and B. 
[in]  LDA  LDA is INTEGER The leading dimension of A. LDA >= max(1,N). 
[in,out]  B  B is REAL array, dimension (LDB, N) On entry, the matrix B in the pair (A,B). On exit, B has been overwritten. If JOBVL='V' or JOBVR='V' or both, then B contains the second part of the real Schur form of the "balanced" versions of the input A and B. 
[in]  LDB  LDB is INTEGER The leading dimension of B. LDB >= max(1,N). 
[out]  ALPHAR  ALPHAR is REAL array, dimension (N) 
[out]  ALPHAI  ALPHAI is REAL array, dimension (N) 
[out]  BETA  BETA is REAL array, dimension (N) On exit, (ALPHAR(j) + ALPHAI(j)*i)/BETA(j), j=1,...,N, will be the generalized eigenvalues. If ALPHAI(j) is zero, then the jth eigenvalue is real; if positive, then the jth and (j+1)st eigenvalues are a complex conjugate pair, with ALPHAI(j+1) negative. Note: the quotients ALPHAR(j)/BETA(j) and ALPHAI(j)/BETA(j) may easily over or underflow, and BETA(j) may even be zero. Thus, the user should avoid naively computing the ratio ALPHA/BETA. However, ALPHAR and ALPHAI will be always less than and usually comparable with norm(A) in magnitude, and BETA always less than and usually comparable with norm(B). 
[out]  VL  VL is REAL array, dimension (LDVL,N) If JOBVL = 'V', the left eigenvectors u(j) are stored one after another in the columns of VL, in the same order as their eigenvalues. If the jth eigenvalue is real, then u(j) = VL(:,j), the jth column of VL. If the jth and (j+1)th eigenvalues form a complex conjugate pair, then u(j) = VL(:,j)+i*VL(:,j+1) and u(j+1) = VL(:,j)i*VL(:,j+1). Each eigenvector will be scaled so the largest component have abs(real part) + abs(imag. part) = 1. Not referenced if JOBVL = 'N'. 
[in]  LDVL  LDVL is INTEGER The leading dimension of the matrix VL. LDVL >= 1, and if JOBVL = 'V', LDVL >= N. 
[out]  VR  VR is REAL array, dimension (LDVR,N) If JOBVR = 'V', the right eigenvectors v(j) are stored one after another in the columns of VR, in the same order as their eigenvalues. If the jth eigenvalue is real, then v(j) = VR(:,j), the jth column of VR. If the jth and (j+1)th eigenvalues form a complex conjugate pair, then v(j) = VR(:,j)+i*VR(:,j+1) and v(j+1) = VR(:,j)i*VR(:,j+1). Each eigenvector will be scaled so the largest component have abs(real part) + abs(imag. part) = 1. Not referenced if JOBVR = 'N'. 
[in]  LDVR  LDVR is INTEGER The leading dimension of the matrix VR. LDVR >= 1, and if JOBVR = 'V', LDVR >= N. 
[out]  ILO  ILO is INTEGER 
[out]  IHI  IHI is INTEGER ILO and IHI are integer values such that on exit A(i,j) = 0 and B(i,j) = 0 if i > j and j = 1,...,ILO1 or i = IHI+1,...,N. If BALANC = 'N' or 'S', ILO = 1 and IHI = N. 
[out]  LSCALE  LSCALE is REAL array, dimension (N) Details of the permutations and scaling factors applied to the left side of A and B. If PL(j) is the index of the row interchanged with row j, and DL(j) is the scaling factor applied to row j, then LSCALE(j) = PL(j) for j = 1,...,ILO1 = DL(j) for j = ILO,...,IHI = PL(j) for j = IHI+1,...,N. The order in which the interchanges are made is N to IHI+1, then 1 to ILO1. 
[out]  RSCALE  RSCALE is REAL array, dimension (N) Details of the permutations and scaling factors applied to the right side of A and B. If PR(j) is the index of the column interchanged with column j, and DR(j) is the scaling factor applied to column j, then RSCALE(j) = PR(j) for j = 1,...,ILO1 = DR(j) for j = ILO,...,IHI = PR(j) for j = IHI+1,...,N The order in which the interchanges are made is N to IHI+1, then 1 to ILO1. 
[out]  ABNRM  ABNRM is REAL The onenorm of the balanced matrix A. 
[out]  BBNRM  BBNRM is REAL The onenorm of the balanced matrix B. 
[out]  RCONDE  RCONDE is REAL array, dimension (N) If SENSE = 'E' or 'B', the reciprocal condition numbers of the eigenvalues, stored in consecutive elements of the array. For a complex conjugate pair of eigenvalues two consecutive elements of RCONDE are set to the same value. Thus RCONDE(j), RCONDV(j), and the jth columns of VL and VR all correspond to the jth eigenpair. If SENSE = 'N' or 'V', RCONDE is not referenced. 
[out]  RCONDV  RCONDV is REAL array, dimension (N) If SENSE = 'V' or 'B', the estimated reciprocal condition numbers of the eigenvectors, stored in consecutive elements of the array. For a complex eigenvector two consecutive elements of RCONDV are set to the same value. If the eigenvalues cannot be reordered to compute RCONDV(j), RCONDV(j) is set to 0; this can only occur when the true value would be very small anyway. If SENSE = 'N' or 'E', RCONDV is not referenced. 
[out]  WORK  WORK is REAL array, dimension (MAX(1,LWORK)) On exit, if INFO = 0, WORK(1) returns the optimal LWORK. 
[in]  LWORK  LWORK is INTEGER The dimension of the array WORK. LWORK >= max(1,2*N). If BALANC = 'S' or 'B', or JOBVL = 'V', or JOBVR = 'V', LWORK >= max(1,6*N). If SENSE = 'E', LWORK >= max(1,10*N). If SENSE = 'V' or 'B', LWORK >= 2*N*N+8*N+16. If LWORK = 1, then a workspace query is assumed; the routine only calculates the optimal size of the WORK array, returns this value as the first entry of the WORK array, and no error message related to LWORK is issued by XERBLA. 
[out]  IWORK  IWORK is INTEGER array, dimension (N+6) If SENSE = 'E', IWORK is not referenced. 
[out]  BWORK  BWORK is LOGICAL array, dimension (N) If SENSE = 'N', BWORK is not referenced. 
[out]  INFO  INFO is INTEGER = 0: successful exit < 0: if INFO = i, the ith argument had an illegal value. = 1,...,N: The QZ iteration failed. No eigenvectors have been calculated, but ALPHAR(j), ALPHAI(j), and BETA(j) should be correct for j=INFO+1,...,N. > N: =N+1: other than QZ iteration failed in SHGEQZ. =N+2: error return from STGEVC. 
Balancing a matrix pair (A,B) includes, first, permuting rows and columns to isolate eigenvalues, second, applying diagonal similarity transformation to the rows and columns to make the rows and columns as close in norm as possible. The computed reciprocal condition numbers correspond to the balanced matrix. Permuting rows and columns will not change the condition numbers (in exact arithmetic) but diagonal scaling will. For further explanation of balancing, see section 4.11.1.2 of LAPACK Users' Guide. An approximate error bound on the chordal distance between the ith computed generalized eigenvalue w and the corresponding exact eigenvalue lambda is chord(w, lambda) <= EPS * norm(ABNRM, BBNRM) / RCONDE(I) An approximate error bound for the angle between the ith computed eigenvector VL(i) or VR(i) is given by EPS * norm(ABNRM, BBNRM) / DIF(i). For further explanation of the reciprocal condition numbers RCONDE and RCONDV, see section 4.11 of LAPACK User's Guide.
Definition at line 389 of file sggevx.f.