NASA's Cassini spacecraft resumed normal operations today, Nov. 24. All science instruments have been turned back on, the spacecraft is properly configured and Cassini is in good health. Mission managers expect to get a full stream of data during next week's flyby of the Saturnian moon Enceladus.
Cassini went into safe mode on Nov. 2, when one bit flipped in the onboard command and data subsystem computer. The bit flip prevented the computer from registering an important instruction, and the spacecraft, as programmed, went into the standby mode. Engineers have traced the steps taken by the computer during that time and have determined that all spacecraft responses were proper, but still do not know why the bit flipped.
The flyby on Nov. 30 will bring Cassini to within about 48 kilometers (30 miles) of the surface of Enceladus. At 61 degrees north latitude, this encounter and its twin three weeks later at the same altitude and latitude, are the closest Cassini will come to the northern hemisphere surface of Enceladus during the extended Solstice mission. (Cassini's closest-ever approach to the surface occurred in October 2008, when it dipped to an altitude of 25 kilometers, or 16 miles.)
During the closest part of the Nov. 30 flyby, Cassini's radio science subsystem will make gravity measurements. The results will be compared with those from an earlier flyby of the Enceladus south pole to understand the moon's interior structure better. Cassini's fields and particles instruments will sample the charged particle environment around Enceladus. Other instruments will capture images in visible light and other parts of the light spectrum after Cassini makes its closest approach.
The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C.
More Cassini information is available at http://www.nasa.gov/cassini and http://saturn.jpl.nasa.gov.
Cassini went into safe mode on Nov. 2, when one bit flipped in the onboard command and data subsystem computer. The bit flip prevented the computer from registering an important instruction, and the spacecraft, as programmed, went into the standby mode. Engineers have traced the steps taken by the computer during that time and have determined that all spacecraft responses were proper, but still do not know why the bit flipped.
The flyby on Nov. 30 will bring Cassini to within about 48 kilometers (30 miles) of the surface of Enceladus. At 61 degrees north latitude, this encounter and its twin three weeks later at the same altitude and latitude, are the closest Cassini will come to the northern hemisphere surface of Enceladus during the extended Solstice mission. (Cassini's closest-ever approach to the surface occurred in October 2008, when it dipped to an altitude of 25 kilometers, or 16 miles.)
During the closest part of the Nov. 30 flyby, Cassini's radio science subsystem will make gravity measurements. The results will be compared with those from an earlier flyby of the Enceladus south pole to understand the moon's interior structure better. Cassini's fields and particles instruments will sample the charged particle environment around Enceladus. Other instruments will capture images in visible light and other parts of the light spectrum after Cassini makes its closest approach.
The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. The Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the mission for NASA's Science Mission Directorate, Washington, D.C.
More Cassini information is available at http://www.nasa.gov/cassini and http://saturn.jpl.nasa.gov.