'Diamond Jenness': After the Grind
This microscopic imager mosaic taken by NASA's Mars Exploration Rover Opportunity shows the rock dubbed "Diamond Jenness." It was taken on sol 177 (July 23, 2004) after the rover first ground into the rock with its rock abrasion tool, or "Rat." The rover later ground into the rock a second time. A sliced spherule, or "blueberry," is visible in the upper left corner of the hole.
Opportunity has bored nearly a dozen holes into the inner walls of "Endurance Crater." On sols 177 and 178 (July 23 and July 24, 2004), the rover worked double-duty on Diamond Jenness. Surface debris and the bumpy shape of the rock resulted in a shallow and irregular hole, only about 2 millimeters (0.08 inch) deep. The final depth was not enough to remove all the bumps and leave a neat hole with a smooth floor. This extremely shallow depression was then examined by the rover's alpha particle X-ray spectrometer.
On Sol 178, Opportunity's "robotic rodent" dined on Diamond Jenness once again, grinding almost an additional 5 millimeters (about 0.2 inch). The rover then applied its Moessbauer spectrometer to the deepened hole. This double dose of Diamond Jenness enabled the science team to examine the rock at varying layers. Results from those grindings are currently being analyzed.
The image mosaic is about 6 centimeters (2.4 inches) across.